- Subfloor moisture pre-test (calcium chloride or in-situ RH probe)
- Pin-meter reading on adjacent millwork and existing floors
- HVAC system check — confirmed running for minimum 14 days pre-install
- Door clearance measurement at every threshold
- Existing baseboard height and reveal documented
- Toilet, vanity, and appliance footprint photographed
- Material delivery path measured (driveway → install zone)
- Pet and child safety walkthrough with homeowner
Service · Floor Repair · 8 Tampa Bay Cities
Floor Repair.
Floor Repair.
Tampa Bay & Sarasota.
Plank replacement, board lacing, sand-and-refinish, water-damage rebuilds, and the slab-prep work that nobody else wants to touch.
8 cities served
300+ Tampa Bay floors finished since 2020
5.0★ · 15 reviews
47-point install standard
01
Repair is the trade test for any flooring installer. New installs are linear — demo, prep, lay, trim, done. Repairs are detective work. Why did this hardwood floor cup? Why is there a squeak under this LVP plank? Why is this tile delaminating eighteen inches from the wall but not anywhere else? Most floor failures have a root cause that's not visible from above — moisture under the slab, a buried roof leak, a settled subfloor joist, a missing expansion gap — and an installer who skips the diagnosis is going to leave you with the same problem in nine months.
Our repair work spans every flooring category we install: lacing in new hardwood planks to match an existing finish (the hardest job in the trade, period), full sand-and-refinish on aged oak, replacing single tiles without disturbing the field, swapping out damaged LVP planks on click-lock systems, and full-room rebuilds after hurricane water intrusion, plumbing failures, or appliance leaks. We also do the unglamorous foundational repair work — slab self-leveling, subfloor patching, joist sistering — that has to happen before any new floor can go down on top.
300+
300+ Tampa Bay floors finished since 2020.
15 verified reviews · 5.0★ Google · Licensed & Insured
This service is available in all eight cities we cover — pick the city closest to you below for repair-specific pricing, FAQ, and a local-context page tailored to that market.
02
- ●Hardwood plank replacement and lacing-in
- ●Sand-and-refinish on solid hardwood
- ●Engineered hardwood plank replacement
- ●Single-tile replacement without grout-line disturbance
- ●Loose-tile re-bonding (when caught early)
- ●Water-damaged floor demolition and rebuild
- ●Subfloor patching and joist sistering
- ●Concrete slab self-leveling for high/low spots
- ●Squeak diagnosis and fix (screws from above or below)
- ●LVP / SPC plank replacement on click-lock systems
- ●Glue-down LVP partial repair
- ●Laminate plank replacement
- ●Grout repair, color-sealing, and re-grouting
- ●Caulk-and-grout sealing at change-of-plane
- ●Insurance-claim documentation with moisture readings
03
- Boxes opened on-site within 4 hours of delivery
- Planks cross-stacked for full airflow on all faces
- Digital hygrometer placed inside acclimation zone
- Minimum 72-hour acclimation logged (hardwood)
- Minimum 48-hour acclimation logged (engineered + laminate)
- Material temperature confirmed within 5° of install zone
- Final pin-meter reading on planks before install
- Acclimation log photographed and saved to job file
- Old flooring fully removed including staples and adhesive residue
- Subfloor swept and shop-vac'd to bare surface
- Squeak survey — all squeaks identified and screwed
- Slab self-level pour if dips exceed manufacturer spec
- Plywood patching for joist-line dips and damaged areas
- 6-mil vapor barrier installed where slab moisture warrants
- Crack-isolation membrane installed on tile substrate
- Final flatness check — 1/8″ tolerance over 10 ft confirmed
- Racking plan laid out before first plank is installed
- Starting wall verified for square and straightness
- Expansion gap measured and maintained at every wall (3/8″ minimum)
- End-joints staggered minimum 6 inches between adjacent rows
- Nailing schedule matched to manufacturer spec (cleat spacing)
- Glue coverage verified on every glue-down plank (lift-test)
- Plank-to-plank tightness confirmed every 10 linear feet
- Daily progress photo documentation
- Threshold and transition strips custom-cut to room
- Quarter-round or shoe-mold installed on every wall
- Mitered corners cut and seated (no gaps)
- Existing baseboards reset or replaced as scoped
- Stair-tread nosing returns scribed and finished
- Door undercuts performed where clearance required
- Toilet flange height verified post-install
- Floor swept, vacuumed, and damp-mopped
- Final moisture reading on subfloor and adjacent millwork
- Walk-through with homeowner — every plank visually inspected
- Touch-up tube provided for any future scratches
- Care-and-maintenance handout printed and signed
- 12-month workmanship warranty registration signed
- Job file with photos & logs sent to homeowner
- Follow-up call scheduled 30 days post-install
04
01
Waiting to call after water damage.
Water damage in flooring is a clock-running problem. Within 24 hours, the subfloor begins absorbing moisture from above and below; within 48 hours, mold growth typically starts in the right humidity conditions; within 72 hours, the structural integrity of plywood subfloor sheathing can be compromised. Call us within 24 hours of any active water issue — we’ll come out same-day or next-day to assess, take baseline moisture readings, document for insurance, and start drying.
02
Letting the wrong contractor ‘match’ replacement planks.
A bad plank-replacement match (wrong species, wrong width, wrong sheen, wrong cut) is visible from across the room and ruins the look of an otherwise good floor. We source matching planks from the original manufacturer when possible, from period-correct alternates when not, and we feather the install (staggering joints into the existing field, lacing planks two rows deep) so the transition is invisible. Most plank repairs we do can’t be found visually after we’re done.
03
Trying to refinish over old finish without proper sanding.
A ‘screen and recoat’ (lightly abrading the existing finish and adding a fresh coat) is appropriate for floors with only surface wear and no deep scratches or stain damage. For floors with real wear, repeated scratches, pet damage, or graying around water exposure points, a full sand-and-refinish is required — three sandings (coarse, medium, fine), proper grain-raise, and three fresh poly coats. Skipping the full sand on a floor that needs it leaves visible wear lines under the new finish.
04
Treating a sagging subfloor as a finish-floor problem.
A floor that bounces underfoot or shows a visible dip across a room isn’t a finish-flooring problem — it’s a structural subfloor problem. Pulling the finish floor and re-laying it over the same sagging subfloor produces the same problem in 12 months. The right repair is to lift the finish floor, sister the underlying joists or patch the subfloor plywood, and then re-lay. We’ll do this on repair calls when it’s the right call — even though it doubles the labor.
05
Ignoring the squeak.
Floor squeaks are caused by relative movement between the finish floor and the subfloor, or between the subfloor and the underlying framing. They almost never ‘heal’ on their own; they get worse over time as the gap that’s producing the friction widens. A ‘squeak survey’ (walking the floor in a grid, marking every squeak with a piece of painter’s tape, and screwing through the finish floor into the framing from above) takes a half-day on a typical home and resolves 90%+ of squeaks permanently. Don’t live with the squeak.
2026 Floor Repair pricing.
| Tier | What it’s best for | Installed cost |
|---|---|---|
| Hardwood Plank Replacement (lacing) | Matches existing finish, hardest repair | $8–$15/sq ft |
| Full Sand-and-Refinish (per sq ft) | Three sandings + stain + 2-coat poly | $4–$7/sq ft |
| Engineered Plank Replacement | When matching product is available | $6–$11/sq ft |
| Single Tile Replacement (each) | Includes grout match | $85–$175 per tile |
| Loose-Tile Re-bonding (per tile) | Injection-bonding when caught early | $45–$85 per tile |
| Water-Damage Rebuild (per sq ft) | Demo + subfloor + new floor | $8–$18/sq ft |
| Subfloor Patching (per patch) | Plywood replacement, screwed and glued | $120–$280 each |
| Slab Self-Leveling (per room) | Liquid pour, cures overnight | $200–$600 |
| Squeak Repair (per squeak) | Diagnosis included | $45–$95 each |
| Insurance-Claim Documentation | Moisture readings + photo report | Included free |
All prices include labor, prep, and standard transition trim. Old-floor removal $1.50–$3/sq ft. Free written quote within 24 hrs →
06
Repair · Bradenton, FL
See Bradenton →
Repair · Lakewood Ranch, FL
See Lakewood Ranch →
Repair · Palmetto, FL
See Palmetto →
Repair · Parrish, FL
See Parrish →
Repair · Sarasota, FL
See Sarasota →
Repair · St. Petersburg, FL
See St. Petersburg →
Repair · Tampa, FL
See Tampa →
Repair · Venice, FL
See Venice →
07
“
★★★★★
We had Napa's lay 1,800 square feet of seven-inch European white oak across the main floor of our Country Club East home. They acclimated the wood for three full days before they touched it, ran a moisture log we got copies of, and finished the job a day ahead of schedule. The transitions to the bathroom tile are dead-flat. Worth every dollar.
“
★★★★★
Got three quotes for a master bath gut and a fourteen-tread staircase. Napa's was middle of the pack on price and immediately the best on technical conversation — they were the only crew to bring up the substrate flatness spec for the 24x48 porcelain we wanted. Both bathrooms and the stairs came out exactly as bid. I'd hire them again without thinking twice.
“
★★★★★
Anna Maria Island beach rental — needed 1,400 square feet of waterproof vinyl plank installed during my one-week vacancy window between bookings. Napa's hit the deadline by 36 hours, the seams are tight, and the floor has now been through six months of rental traffic without a single complaint. Great communication the whole way.
“
★★★★★
Builder-grade LVP in our new IslandWalk home was already showing wear at the eighteen-month mark. Napa's came out, recommended a step up to a 22-mil SPC with deeper embossing, and replaced the entire main floor over four days. The new floor reads as a totally different product even though it's the same general category. Pleased.
“
★★★★★
We bought a 1924 Hyde Park bungalow with original oak floors that had been carpeted over twice. Napa's did the demo, repaired the joist-line dips, replaced four damaged planks with lacing that's genuinely invisible, and sand-and-refinished the whole 1,650 square feet over five days. The floor looks better than I thought possible.
“
★★★★★
Closed on our North River Ranch build in July, lived with the standard LVP through one summer, then hired Napa's to put in seven-inch engineered oak in the main living areas. They worked around our toddler's nap schedule, brought the same two installers every day, and finished in four working days. The floor is gorgeous.
07
Can you really make a replaced hardwood plank invisible?
Yes, in most cases — and we charge accordingly because plank lacing is the hardest job in the entire trade. The trick is matching three things at once: the species and grade of the original wood, the existing finish color and sheen, and the existing wear pattern on the surrounding planks. We source matching planks from our salvage stock, hand-stain them on-site, and feather the new plank in with toothing cuts so the seams don't fall on a straight line. The result usually reads as 'invisible' from standing height; in raked late-afternoon sun, an expert might spot the lace. For most homeowners it's a non-issue.
My hardwood floor squeaks — can you fix that without ripping it up?
Usually, yes. Squeaks come from two sources: the flooring rubbing against the subfloor (fixable from above with hidden trim-head screws), or the subfloor rubbing against the joists below (fixable from below in a crawlspace, or from above with longer screws into the joists). We diagnose the squeak source first — most floors have multiple squeaks with different causes — and quote per squeak, not per square foot. Most jobs run $45–$95 per squeak.
How do I know if my water-damaged floor can be saved vs. needs full replacement?
Three tests: First, a calcium chloride moisture reading on the subfloor — if it's below 4 lbs/1,000 sq ft, the floor can likely dry out and be reused. Second, a visual inspection for cupping, crowning, and gapping — minor cupping can usually sand-and-refinish back to flat; severe cupping and any crowning typically can't. Third, a pin-meter reading on the planks themselves — if the wood moisture exceeds 14% it's still actively wet, and we'll dry it before judging it. We document all three readings as part of every insurance-claim job.
Do you work with insurance companies on water-damage claims?
Yes — about 30% of our repair work is insurance-driven. We document everything (calcium chloride readings, pin-meter readings, dated photos, sub-floor condition, scope of damage) in a format that insurance adjusters expect. We don't bill the insurance company directly (the homeowner does), but our documentation has been used successfully on dozens of claims with carriers including State Farm, Citizens, Universal, USAA, and Tower Hill.
Free Estimate · No Pressure
Get a real repair estimate.
Free in-home measure. Written, line-itemized quote within 24 hours. Repair done to the 47-point Napa’s standard.
(407) 627-9533